Article information

Views: 2275


Safronova T.N., Institute of Trade and Economics , ul. L. Prushinskoi 2, Krasnoyarsk, 660075 Russia,

Evtuhova O.M., Siberian Federal University, pr. Svobodnyi 79, Krasnoyarsk, 660041 Russia

Year 2014 Issue 1 DOI 641.1/3
Annotation The present work is devoted to the development of technological parameters for the hydrothermal processing of powdered sprouted wheat and justification of use of the powder produced as a food additive. Introduction of sprouts into the diet stimulates metabolism and hematopoiesis, boosts immunity, compensates for vitamin and mineral deficiency, normalizes the acid-alkaline balance, promotes the elimination of toxins from the body, stimulates digestion, and slows the aging process. The use of sprouted wheat grains in public catering is very limited due to the short shelf-life of this product. Storage of dried grains provides a solution for this problem; however, it necessitates the development of a technology for the use of dried sprouted wheat grain. The present study was a part of research on the powder produced from sprouted wheat and centered on the process of hydrothermal treatment of dry sprouted wheat powder. Conventional methods were used in the present work for the analysis of physical and chemical parameters. A range of factors, including the protein content of the powder, the degree of mechanical damage of the starch granules, and the pH value of the solution, affects the water absorption capacity of the powder produced from sprouted wheat. Treatment time, temperature, and mash ratio at pH 4.5 and pH 7.0 were varied in experiments performed to determine the optimum operating parameters of the hydrothermal processing. As a result of the study, an energy-efficient technology has been developed for the hydrothermal processing of powdered sprouted wheat grains. The following process parameters were selected: an optimum swelling temperature of 45В°C, hydrothermal treatment duration of 60 min at pH 4.5, and an optimum mash ratio of 1:1.25.
Keywords Technological parameters of hydrothermal processing, powdered germinated wheat grains, the degree of powder swelling
Artice information Received November 30, -0001
Accepted November 30, -0001
Available online November 30, -0001
Imprint article Safronova T.N. DEVELOPMENT OF TECHNOLOGICAL PARAMETERS FOR THE HYDROTERMAL PROCESSING OF SPROUTED WHEAT GRAIN POWDER / Safronova T.N., Evtuhova O.M. // Food and Raw Materials. - 2014. - no. 1. - P. 47-50
Download the full article
  1. Reinhart's, P., Whole grain breads: new techniques, extraordinary flavor, Random House LLC, 2011.
  2. Galchus, R., Homegrown sprouts: a fresh, healthy, and delicious step-by-step guide to sprouting year round, Quarry Books, 2013.
  3. Haag, M., Food sense: a guide to eating sensibly, Xlibris Corporation, 2011.
  4. Haas, E. and Levin, B., Staying healthy with nutrition, rev: the complete guide to diet and nutritional medicine, Random House LLC, 2012.
  5. Watson, R., Preedy, V., and Patel, V., Nuts and seeds in health and disease prevention, Academic Press, 2011.
  6. Preedy, V., Watson, R., and Patel, V. Flour and breads and their fortification in health and disease prevention, Academic Press, 2011.
  7. Arendt, E. and Zannini, E., Cereal grains for the food and beverage industries, Elsevier, 2013.
  8. Issues in food production, processing, and preparation: 2013 Edition, Scholarly Editions, 2013.
  9. Zhao, Y., Specialty foods: processing technology, quality, and safety, CRC Press, 2012.
  10. Dunford, N.T., Food and industrial bioproducts and bioprocessing, John Wiley & Sons, 2012.
  11. Bewley, D.J., Bradford, K., and Hilhorst, H., Seeds: physiology of development, germination and dormancy, Springer, 2012.

Copyright © 2014, KemIFST. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International License (, allowing third parties to copy and redistribute the material in any medium or format and to remix, transform, and build upon the material for any purpose, even commercially, provided the original work is properly cited and statesitslicense. This article is published with open access at